🔥 DTF Printing Pressing Instructions

Apply Your Mercy Prints DTF Transfers the Right Way — Every Time

For the best results and long-lasting prints, follow these step-by-step instructions to apply your DTF gang sheets from Mercy Prints. Whether you're pressing on T-shirts, hoodies, or bags — our transfers are made for professional-level results.

✅ Required Equipment

  • Heat Press (Recommended)
    – Clamshell or Swing-away style

  • Teflon Sheet or Parchment Paper

  • Lint Roller (for pre-press cleaning)

  • Heat Tape (optional for positioning)

👕 Fabric Compatibility

Mercy Prints’ DTF transfers work on:
✅ Cotton
✅ Polyester
✅ Cotton/Poly blends
✅ Tri-blends
✅ Fleece
✅ Canvas & more

⚙️ Standard Pressing Settings

  • Temperature: 290°F – 320°F (Adjust based on your press)

  • Pressure: Medium to Firm (Level 6–8 if adjustable)

  • Time: 12–15 seconds

🪄 Application Steps

1. Pre-Press the Garment (Important)

  • Use a lint roller to clean the fabric

  • Press the blank garment for 5–7 seconds to remove moisture and wrinkles

2. Position the DTF Transfer

  • Place the transfer design side down (film side up) on the garment

  • Align as desired — use heat tape if necessary

3. Heat Press the Transfer

  • Press at 290–320°F for 12–15 seconds

  • Use medium to firm pressure

  • No Teflon sheet needed during first press

4. Cool Peel

  • Let the film cool completely before peeling

  • Slowly peel from one corner — it should come off cleanly

  • If the design lifts, repress for 5 seconds and try again

5. Optional Second Press (Recommended)

  • Cover the design with a Teflon sheet or parchment paper

  • Press again for 5–8 seconds to lock in the print and improve durability

👕 Aftercare Instructions

  • Wait 24 hours before washing

  • Wash inside out in cold water

  • Do not bleach

  • Tumble dry low heat or hang dry

  • Do not iron directly on the print

🛠️ Troubleshooting Tips

Problem Solution
Transfer not sticking Check pressure & temperature — increase slightly if needed
Edges lifting after peel Repress with cover sheet for 5–7 seconds
Film tearing on peel Let it fully cool before peeling — hot peel will ruin the design
Faded or dull colors Make sure you're pressing at the correct temp and time

🧾 Need Help?

We’re always here for support.
📧 Email: info@mercyprints.com
📞 Phone: 757-520-5200
📍 Visit: 8401 Mayland Drive, STE A, Richmond, VA 23294

Mercy Prints — Bringing your designs to life, one flawless press at a time.